Cleaning and maintaining your vacuum cleaner has a lot of benefits. For starters, it will keep the suction power of your machine. You will finish your cleaning faster and the results will be more impressive. It is also a great way to make sure that your house is clean and free of bad odors and allergens. You need to know how to clean a vacuum hose to make sure that your machine is always ready to perform. Cleaning the vacuum hose will keep it performing efficiently and will maintain the strong suction power of the machine. The hose allows you to easily reach places that are far away from the base of the machine. This will include the hidden places under beds, pieces of furniture and the tough to reach corners where the base won’t fit. Although the motor works to suck on most of the dust, some will always find their way into the hose and remain there. Hoses usually get clogged with dust and debris, especially if they are not cleaned often. If you don’t clean your hose properly and frequently, you might end up replacing it. If this is the case, check out the best tile floor vacuum cleaner in 2018 before making your purchase.
How to Clean a Vacuum Hose Properly?
Learning how to test a vacuum tube will help you know if your hose needs some proper cleaning. If you feel like you need to go through every area twice or if your vacuum accidentally sucked on some toys or socks, then it is time to clean your vacuum hose thoroughly. Here are some easy steps that will help you.
Unclog your Hose:
Have you ever wondered about how to clean a smelly vacuum hose? Trapped dust can make your hose smell really bad. What is worse is that once you start using your vacuum, the stinky old smell will spread into the air and throughout the house. Simply detach your vacuum hose from the machine. Lay it flat on the floor and make sure that there are no dents. Next, insert a broom handle inside the hose and push it gently. Make sure that you don’t push too hard and that your hose is not bent. As you push the handle through the entire length, you will be unclogging the hose releasing all lodged items. You might be surprised by the amount of dust, socks and little toys that might have go trapped inside.
Wash your Hose:
It is always a good idea to wash your hose. This will help you get rid of all the remains of dust and debris. Fill your sink with water and add some mild detergent or dish soap. You can also add some disinfectant to make sure that your hose is free of allergens. Submerge the hose in the water and rub it from the outside. Swirl it around to make sure that the water has entered inside to clean the inner walls. Rinse the inside of the hose by holding directly in front of the tap. The water from the tap will flush the insides of the hose. Keep on doing this until the water runs clear. You can also use a bottle brush to rub the insides of the hose if you feel that there is still some trapped dirt.
Dry Your Hose:
If you have already bought the best commercial vacuum according to your budget and needs, you need to make sure that you know how to dry a vacuum hose the right way. A wet hose will not work properly and can actually ruin your motor. An easy way would be to hang the hose over the shower curtain. You can let it drip for several hours as this will give the inner folds the time they need to completely dry. You should always inspect the insides to make sure that there is no moisture.
Making the initial investment in a high-quality home appliance is a great decision. Everybody understands that high-quality comes with a price. However, it is very important to think of how to clean a vacuum hose to lengthen the lifespan of your vacuum cleaner.
